I’m off to Moab tomorrow afternoon. The 24 Hours of Moab starts on Saturday, and since I’ll be 1 of 2 wrenches for the 4 teams that Pereira Cycles has entered in the event, I want to make sure our pit location is prime. Today is prep day and I don’t want to forget anything, so I thought I’d make a list. Here it is.

Tools & Lubes: PCBR Spoker, shop apron, repair stands, wheel truing stand, air tank, air compressor, air compressor hose, air compressor attachments(schrader, presta, air gun), pressure washer(handy in muddy situations, but set it on low), pedal wrenches(6mm hex, 8mm hex, 15mm open end), multiple multi tools, hex wrenches(2 sets), open/box metric wrenches, 3/32 hex wrench(for Chris King Hubs), Flat head screwdrivers(little to big and everything in between, phillips screwdrivers(full size run), tire levers, spoke wrenches(Mavic, Shimano, standard), chain tools, tire pressure gauge, brake bleed kits(Hayes, Magura, Avid), Knipex Plier Wrench(a TPW favorite), diagonal cutters, housing cutters, chain lube, degreaser, hand cleaner, rubbing alcohol, safety glasses, hack saw, spare hack saw blade, bottom bracket tools, cassette tool, torque wrench, magnetic parts tray, chain whip, crank pullers, cone wrenches, floor pumps, lock ring wrench, chain whip, headset wrenches, wire brush, toothbrush, scrub brush, calipers, measuring tape, spanner tools(great for eccentric bbs), toe straps, clamps …….

Spare Parts: derailleurs, derailleur cables, derailleur housing, brake cables, brake housing, brake ferrules, shift ferrules, brake pads(Hayes, Magura, Avid), brake lines, brake fittings, brake fluids, brake rotors, spokes, chains(single speed, 9 speed), Shimano chain pins, Sram Power Links, Stan’s No Tubes Solution, Nite Rider light mounts, chain ring bolts, spokes, my bike, hair spray, 26″ tires, 26″ tubes, 29″ tires, 29″ tubes, Sram shifters, Shimano shifters………

Misc.: table, headlamp, work lights, stationary trainer, front wheel block, carpet, pop up canopy, tie downs, buckets, chairs, Trixi’s bed, Trixi food, Trixi bowls, pit bike, yoga ball(crucial), goggles(in case of dust/sand storm), sleeping bag, pillow, extension cords, outlet splitters, tunes, rags, paper towels, hand cleaner, flooring …………

I’m positive I’ve left some things out. I do like to be over prepared but forgetting a few things isn’t usually a big issue. In my experience, there’s always a solution to be found for any mechanical problem, right in the pit area. The 24 hour racing community creates a friendly and supportive environment for everyone. Hopefully we’ll see you there.

This entry was posted on Wednesday, October 10th, 2007 at 9:07 pm and is filed under Tools, How To, Repair Tips, Mechanical Hints, Friends, Daily Rant. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.